Insert a SIM card and battery
Note: Switch the device off and disconnect the charger and any other device
before removing any covers. Avoid touching electronic components while changing
any covers. Always store and use the device with any covers attached.
Important: This device is designed to be used with a standard SIM card (see figure)
only. Use of incompatible SIM cards may damage the card or the device, and may
corrupt data stored on the card. Please consult your mobile operator for the use of
a SIM card that has a mini-UICC cutout.
Important: To prevent damage to the SIM card, always remove the battery before
you insert or remove the card.
This phone is intended for use with a BL-4C battery. Always use original Nokia
batteries.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Place your finger in the recess at the top of the phone, and carefully lift and
remove the back cover (1).
2 If the battery is inserted, lift the battery out (2).
3 Insert or remove the SIM card (3 or 4). Make sure the contact area of the card is
facing down.
6
Get started
4 Line up the contacts of the battery and the battery compartment, and insert the
battery (5). To replace the back cover, direct the bottom locking catches toward
their slots (6), and press down until the cover locks into place (7).