Nokia C2 05 - Insert a SIM card and battery

background image

Insert a SIM card and battery

Note: Switch the device off and disconnect the charger and any other device before

removing any covers. Avoid touching electronic components while changing any covers.

Always store and use the device with any covers attached.

Important: This device is designed to be used with a standard SIM card (see figure)

only. Use of incompatible SIM cards may damage the card or the device, and may corrupt

data stored on the card. Please consult your mobile operator for the use of a SIM card

that has a mini-UICC cutout.

Important: To prevent damage to the SIM card, always remove the battery before

you insert or remove the card.
This phone is intended for use with a BL-4C battery. Always use original Nokia batteries.
The SIM card and its contacts can be easily damaged by scratches or bending, so be

careful when handling, inserting, or removing the card.
1 Place your finger in the recess at the top of the phone, and carefully lift and remove

the back cover (1).

2 If the battery is inserted, lift the battery out (2).

3 Insert or remove the SIM card (3 or 4). Make sure the contact area of the card is

facing down.

6

Get started

background image

4 Line up the contacts of the battery and the battery compartment, and insert the

battery (5). To replace the back cover, direct the bottom locking catches toward

their slots (6), and press down until the cover locks into place (7).